简介金禾环保连续木炭炭化机工艺
Brief introduction of Jinhe environmental protection continuous charcoal carbonization machine process
(1)气化炉造气：将粒度为5-30mm的生物质质料投进气化炉引燃，炉气经一段喷淋、两段冷却以后，经引风机送至炭化炉前期升温运用，通常情况下此期间质料的含水量在15%以下。

(1) gasification furnace gas: the particle size of 5-30mm biomass materials into the gasifier furnace gas ignition, after a period of spray, two segments after cooling, after fan sent to the carbonization furnace using pre heating, usually during the period of material moisture content below 15%.

(2)进料：等炭化炉温度升到需求温度时，通过螺旋上料机把要炭化的生物质送入炭化炉。

(2) the feed: such as carbonization furnace temperature rises to the demand of temperature, the screw feeder to carbonization of biomass into the carbonization furnace.

(3)热解：此技术进程为要害进程，其温度、转速、频率等参数需求操控好，通常情况下，热解温度操控在摆布，负压运行。

(3): this technique is the key process of pyrolysis process, the temperature, speed, frequency and other parameters of the demand control, under normal circumstances, the pyrolysis temperature control at the mercy, negative pressure operation.

(4)净化冷凝：从热解炉出来的烟气中杂质多且呈酸性，温度通过冷却、净化、别离等得到纯洁可燃气把副产品别离出来。

(4): from the flue gas purifying condensed pyrolysis furnace out of impurities and acidic, temperature by cooling, purification, separation and other combustible gas to get pure by-product separated.

(5)冷却出炭：炉内生物质通过热解生成的固态炭，从炉子底部流入冷却炭化机，通过冷却输出装袋寄存。

(5) cooling carbon: solid carbon biomass by pyrolysis furnace, flows into the cooling carbonization machine from the stove bottom, through the cooling output bagging storage.